欢迎访问作物学报,今天是

作物学报 ›› 2008, Vol. 34 ›› Issue (10): 1734-1743.doi: 10.3724/SP.J.1006.2008.01734

• 作物遗传育种·种质资源·分子遗传学 • 上一篇    下一篇

基于NC III和TTC设计的胚乳性状QTL区间作图方法

王学枫;汤在祥;王亚民;宋雯;徐辰武*   

  1. 扬州大学江苏省作物遗传生理重点实验室 / 教育部植物功能基因组学重点实验室, 江苏扬州225009
  • 收稿日期:2008-01-10 修回日期:1900-01-01 出版日期:2008-10-12 网络出版日期:2008-10-12
  • 通讯作者: 徐辰武

Interval Mapping of Quantitative Trait Loci Underlying Endosperm Traits with NC III and TTC Designs

WANG Xue-Feng,TANG Zai-Xiang,WANG Ya-Min,SONG Wen,XU Chen-Wu*   

  1. Jiangsu Provincial Key Laboratory of Crop Genetics and Physiology / Key Laboratory of Plant Functional Genomics, Ministry of Education, Yang-zhou University, Yangzhou 225009, Jiangsu, China
  • Received:2008-01-10 Revised:1900-01-01 Published:2008-10-12 Published online:2008-10-12
  • Contact: XU Chen-Wu

摘要: 根据三倍体胚乳性状的遗传模型, 提出基于NC III以及TTC两种遗传设计的胚乳性状QTL作图新方法, 并通过计算机模拟数据, 对该方法的可行性和有效性进行了分析验证。模拟研究供试因素包括QTL遗传力、F2群体植株数和每家系混合样品测定的胚乳数。考察指标包括QTL的统计功效以及QTL位置和效应估计的准确度与精确度。结果表明, 2种设计均有较高的QTL统计功效, 在供试的大多数处理中, 即使QTL的遗传力只有5%, 其被发现能力也可达100%。两种设计均可有效区分胚乳QTL的各种遗传效应。基于TTC设计的胚乳QTL作图方法, 在QTL的统计功效、位置估计和效应估计上, 均优于NC III设计, 虽然这一优势随着QTL遗传力的提高以及样本容量的增大而有降低的趋势。

关键词: 胚乳性状, QTL作图, NC III设计, TTC设计, 极大似然估计, EM算法

Abstract: The endosperm of cereal crops is a triploid tissue produced by a male gamete from the pollen grain fusing with two female nuclei. Endosperm traits refer to those characteristics that determined by the physical and chemical properties of grain endosperm. Because many quality traits are closely related to endosperms, the genetic study of endosperm traits plays a fundamental and vital role in improving grain quality. There have been several publications detailing the unique properties of endosperm traits. A series of QTL mapping models and approaches specific for triploid traits have been proposed, using single grain observation or more practical one that obtained from bulked samples. However, current methods based on bulked samples often fail to estimate two dominance effects of endosperm QTL separately, or involve a heavy work of crossing. On the basis of quantitative genetic models for triploid endosperm traits, a new mapping approach based on North Carolina Design III (NC III) and Triple Test Cross (TTC) was proposed in this study. Feasibility and efficacy of the method were investigated through simulated data. Experimental factors considered in the simulations include QTL heritability, number of plants in F2 population, and number of endosperms collected per family. The results suggested that the two methods had satisfactorily high detection powers, which reached 100% even when the QTL heritability was 5%. But the TTC-based approach tended to have slightly higher power than the NC III-based one. Both approaches can distinguish two dominance effects successfully. But overall, the TTC-based approach can offer better estimation of either QTL position or effect, though this superiority waned as the heritability and sample size increase.

Key words: Endosperm trait, QTL mapping, North Carolina Design III, Triple Test Cross, Maximum likelihood estimation, EM algorithm

[1] 李书宇, 黄杨, 熊洁, 丁戈, 陈伦林, 宋来强. 甘蓝型油菜早熟性状QTL定位及候选基因筛选[J]. 作物学报, 2021, 47(4): 626-637.
[2] 孙子淇,李慧慧,张鲁燕,王建康. QTL作图中零假设检验统计量分布特征及LOD临界值估计方法研究[J]. 作物学报, 2013, 39(01): 1-11.
[3] 李慧慧,张鲁燕,王建康. 数量性状基因定位研究中若干常见问题的分析与解答[J]. 作物学报, 2010, 36(06): 918-931.
[4] 王亚民,汤在祥,陆鑫,徐辰武. 基于贝叶斯统计的谷物胚乳性状QTL多区间作图方法[J]. 作物学报, 2009, 35(9): 1569-1575.
[5] 王建康. 数量性状基因的完备区间作图方法[J]. 作物学报, 2009, 35(2): 239-245.
[6] 敖雁;徐辰武. 四向杂交设计QTL分析的极大似然方法[J]. 作物学报, 2006, 32(01): 51-56.
[7] 李杰勤;张启军;叶少平;赵兵;梁永书;彭勇;吴发强;王世全;李平. 四种不同QTL作图方法的比较研究[J]. 作物学报, 2005, 31(11): 1473-1477.
[8] 徐辰武;王伟;胡治球;孙长森. 基于株平均值的胚乳性状QTL作图的极大似然方法[J]. 作物学报, 2005, 31(10): 1271-1276.
[9] 王伟;胡治球;孙长森;徐辰武. 基于单粒观察值的胚乳性状QTL图的构建方法[J]. 作物学报, 2005, 31(08): 989-994.
[10] 朱军;许馥华. 胚乳性状的遗传模型及其分析方法[J]. 作物学报, 1994, 20(03): 264-270.
[11] 黄志仁;周美学;黄友圣;张志胜. 大麦蛋白质含量的遗传研究[J]. 作物学报, 1991, 17(01): 47-53.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!