欢迎访问作物学报,今天是

作物学报 ›› 2026, Vol. 52 ›› Issue (1): 118-130.doi: 10.3724/SP.J.1006.2026.55034

• 作物遗传育种·种质资源·分子遗传学 • 上一篇    下一篇

花生种质果柄强度的遗传分化与主要影响因子分析

孙辰硕1(), 张月1, 田泽锴1, 晏立英1, 康彦平1, 陈玉宁1, 王欣1, 淮东欣1, 王前前1, 姜慧芳1, 罗怀勇1, 黄莉1, 廖伯寿1, 王志慧1,2,*(), 雷永1,*()   

  1. 1中国农业科学院油料作物研究所, 湖北武汉 430062
    2华中农业大学植物科学技术学院, 湖北武汉 430070
  • 收稿日期:2025-05-27 接受日期:2025-10-30 出版日期:2026-01-12 网络出版日期:2025-11-04
  • 通讯作者: *王志慧, E-mail: wangzhihui@caas.cn; 雷永, E-mail: leiyong@caas.cn
  • 作者简介:E-mail: suncs0220@163.com
  • 基金资助:
    国家重点研发计划项目(2023YFD1200201);湖北省支持种业高质量发展资金项目(HBZY2023B003);湖北省农业科技创新中心创新团队项目(2024620000001031);财政部和农业农村部国家现代农业产业技术体系建设专项(CARS-13);中国农业科学院科技创新工程项目(CAAS-ASTIP-2021-OCRI)

Genetic differentiation of peg strength and analysis of major influencing factors in peanut germplasm

Sun Chen-Shuo1(), Zhang Yue1, Tian Ze-Kai1, Yan Li-Ying1, Kang Yan-Ping1, Chen Yu-Ning1, Wang Xin1, Huai Dong-Xin1, Wang Qian-Qian1, Jiang Hui-Fang1, Luo Huai-Yong1, Huang Li1, Liao Bo-Shou1, Wang Zhi-Hui1,2,*(), Lei Yong1,*()   

  1. 1Oil Crops Research Institute, Chinese Academy of Agricultural Sciences, Wuhan 430062, Hubei, China
    2College of Plant Science and Technology, Huazhong Agricultural University, Wuhan 430070, Hubei, China
  • Received:2025-05-27 Accepted:2025-10-30 Published:2026-01-12 Published online:2025-11-04
  • Contact: *E-mail: wangzhihui@caas.cn; E-mail: leiyong@caas.cn
  • Supported by:
    National Key Research and Development Program of China(2023YFD1200201);Development for high-quality Seed Industry of Hubei Province(HBZY2023B003);Innovation Team of Hubei Agricultural Science and Technology Innovation Center Project(2024620000001031);China Agriculture Research System of MOF and MARA(CARS-13);Agricultural Science and Technology Innovation Program of Chinese Academy of Agricultural Sciences(CAAS-ASTIP-2021-OCRI)

摘要:

花生(Arachis hypogaea L.)作为我国重要的油料作物, 具有“地上开花地下结果”的独特生物学特性。这一特性导致收获过程中, 尤其在机械化收获条件下, 出现较高的落果率, 严重影响了收获效率并造成产量损失。品种间果柄强度的差异是决定挖掘作业落果率差异的主要因素, 系统揭示花生果柄强度的变异规律并阐明其主要影响因子, 将为培育抗落果品种提供优异材料和技术支撑。为此, 本研究调查了241份代表性花生种质材料的果柄强度及其相关的果柄粗度、果柄木质素和纤维素含量。结果表明, 茎-柄和果-柄节点拉断力在不同材料间的变异系数超30%, 存在丰富的表型变异, 成功筛选了11份优异种质资源; 不同变种间的果柄强度差异显著, 珍珠豆型和多粒型的果柄强度显著高于其他类型, 表明遗传因素对花生果柄强度产生了不同的影响。基于果柄强度相关性状开展了相关性分析、主成分分析、多元线性回归分析等, 结果显示果柄强度与果柄纤维素含量高度相关; 选取了4个极端表型的花生材料, 测定了花生果柄4个发育时期的纤维素和木质素含量, 研究发现了果柄强度大的材料在不同发育时期的纤维素含量均显著高于果柄强度小的材料, 再次验证了纤维素含量是影响果柄强度的重要因素。本研究揭示了花生果柄强度在种质资源中的变异情况, 阐明了果柄纤维素含量对果柄强度的重要影响, 为后续开展花生果柄强度遗传改良和培育适宜机械化收获的抗落果花生品种奠定了基础。

关键词: 花生, 茎-柄节点拉断力, 果-柄节点拉断力, 遗传分化, 影响因子

Abstract:

Peanut (Arachis hypogaea L.) is an important oil crop in China. Due to its unique biological characteristic of “aerial flowering and subterranean fruiting”, it faces a high pod drop rate during harvesting—especially under mechanized conditions—which significantly reduces production efficiency and leads to yield losses. Variations in peg strength among peanut germplasm are a key determinant of pod drop rate during digging operations. Systematically uncovering the variation patterns in peg strength and identifying its primary influencing factors will provide valuable germplasm and technical support for breeding pod drop-resistant varieties. In this study, peg strength and related traits—including peg thickness, lignin content, and cellulose content—were evaluated across 241 representative peanut germplasm accessions. The results showed that the coefficients of variation for the breaking force at both the stem-peg and pod-peg junctions exceeded 30%, indicating substantial phenotypic diversity. Eleven elite germplasm accessions with superior peg strength were identified. Significant differences in peg strength were observed among botanical types, with Valencia and Multigrain types exhibiting significantly higher values than others, suggesting that genetic background has a notable influence on peg strength. Further correlation analysis, principal component analysis, and multiple linear regression revealed a strong positive correlation between peg strength and cellulose content. To validate this, four accessions with extreme phenotypes were selected, and cellulose and lignin contents were measured at four developmental stages of the peg. Accessions with high peg strength consistently exhibited significantly higher cellulose content across all stages compared to those with low peg strength, confirming that cellulose content is a key factor influencing peg strength. This study clarifies the phenotypic variation in peg strength among peanut germplasm and highlights the critical role of cellulose content, providing a theoretical basis for the genetic improvement of peg strength and the development of peanut varieties suitable for mechanized harvesting.

Key words: peanut, breaking force at stem-peg, breaking force at pod-peg, genetic differentiation, influencing factor

图1

电动拉力机以及茎-柄和果-柄节点拉断力测定示意图 A: 电动拉力机; B: 茎-柄节点拉断力测定方式; C: 果-柄节点拉断力测定方式。"

图2

241份花生材料茎-柄节点(A)和果-柄节点(B)拉断力的频次分布图 缩写见图1。"

表1

不同植物学类型花生果柄强度的变异分析"

植物学类型
Types of botany
参数
Parameter
茎-柄节点拉断力
BFSP (N)
果-柄节点拉断力
BFPP (N)
珍珠豆型
Var. vulgaris
平均值Average 11.21±2.71 6.44±1.81
最大值Max. 18.19±2.82 14.50±4.00
最小值Min. 5.46±0.74 3.38±1.53
变异系数CV (%) 24.19 28.13
多粒型
Var. fastigiata
平均值Average 12.98±7.01 5.94±1.50
最大值Max. 28.54±2.19 9.12±5.93
最小值Min. 6.89±0.87 4.15±2.45
变异系数CV (%) 53.99 25.23
中间型
Intermediate
平均值Average 8.69±1.79 5.95±1.80
最大值Max. 13.83±3.10 11.79±2.52
最小值Min. 5.98±0.39 2.42±1.20
变异系数CV (%) 20.60 30.25
普通型
Var. hypogaea
平均值Average 7.88±2.46 5.28±1.26
最大值Max. 17.16±3.13 8.25±3.07
最小值Min. 4.17±1.08 3.19±1.99
变异系数CV (%) 31.25 23.88
龙生型
Var. hirsuta
平均值Average 6.29±1.28 3.80±1.00
最大值Max. 8.31±0.44 5.66±3.45
最小值Min. 4.07±0.76 2.50±1.77
变异系数CV (%) 20.42 26.24

图3

不同植物学类型间茎-柄节点(A)和果-柄节点拉断力(B)的比较分析 缩写见图1。箱线图上方的星号代表两组间的显著性差异。*: P < 0.05; **: P < 0.01; ***: P < 0.001; ****: P < 0.0001。"

表2

241花生材料的果柄强度相关性状的相关性分析"

性状
Trait
茎-柄节点拉断力BFSP 果-柄节点拉断力BFPP 荚壳竖纹
数量
VRN
茎-柄节点果柄粗度STSP 果-柄节点果柄粗度STPP 纤维素含量CsC 木质素含量LiC
茎-柄节点拉断力BFSP 1.00
果-柄节点拉断力BFPP 0.52** 1.00
荚壳竖纹数量VRN 0.00 -0.06 1.00
茎-柄节点果柄粗度STSP 0.16* 0.22** 0.08 1.00
果-柄节点果柄粗度STPP -0.05 0.11 0.14* 0.38** 1.00
纤维素含量CsC 0.10 0.09 0.02 0.04 -0.07 1.00
木质素含量LiC 0.10 0.01 -0.10 -0.11 0.04 0 1.00

图4

不同植物学类型果柄拉断力相关性状间的相关性分析 A~E: 多粒型、珍珠豆型、中间型、龙生型、普通型果柄拉断力相关性状间的相关性分析。*表示不同材料间在0.05水平上存在显著性相关(P < 0.05), **表示不同材料间在0.01水平上存在显著性相关(P < 0.01)。缩写同表2。"

表3

241份花生材料果柄强度的主成分分析"

指标
Index
主成分Principal component
PC1 PC2 PC3
茎-柄节点拉断力BFSP (N) 0.26 0.50 0.01
果-柄节点拉断力BFPP (N) 0.29 0.42 -0.20
荚壳竖纹数量VRN 0.30 -0.29 0.17
茎-柄节点果柄粗度STSP (mm) 0.36 -0.21 -0.27
果-柄节点果柄粗度STPP (mm) 0.29 -0.39 -0.11
果柄木质素含量LiC (mg g-1) 0.11 0.18 0.23
果柄纤维素含量CsC (mg g-1) 0.12 -0.01 0.88
特征值Eigenvalue 2.09 1.35 1.01
贡献率Contribution (%) 29.78 19.28 14.47
累计贡献率Accumulative contribution (%) 29.78 49.06 63.53

表4

不同植物学类型花生材料果柄强度的主成分分析"

性状
Trait
多粒型
Var. vulgaris
珍珠豆型
Var. fastigiata
龙生型
Var. hirsuta
普通型
Var. hypogaea
中间型
Intermediate
PC1 PC2 PC3 PC1 PC2 PC3 PC1 PC2 PC3 PC1 PC2 PC3 PC1 PC2 PC3
茎-柄节点拉断力BFSP (N) 0.88 0.12 — 0.70 -0.43 0.08 0.59 -0.23 -0.63 0.40 0.62 -0.32 0.84 -0.13 0.24
果-柄节点拉断力BFPP (N) 0.83 0.34 — 0.69 -0.42 0.08 0.72 0.25 -0.14 0.67 0.29 -0.41 0.08 0.61 0.24
荚壳竖纹数VRN 0.72 -0.31 — 0.35 0.55 -0.15 -0.38 0.76 0.01 0.43 -0.14 0.58 -0.54 -0.58 0.27
茎-柄节点果柄粗度STSP (mm) 0.73 -0.04 — 0.72 0.30 -0.16 0.77 -0.20 0.10 0.60 -0.48 -0.29 -0.57 0.43 0.13
果-柄节点果柄粗度STPP (mm) 0.61 -0.28 — 0.59 0.54 0.05 0.35 -0.31 0.83 0.57 -0.58 0.18 -0.26 0.51 -0.66
果柄木质素含量LiC (mg g-1) 0.67 -0.10 — 0.23 -0.58 0.10 0.30 0.70 0.18 0.29 0.47 0.49 0.31 0.54 0.56
果柄纤维素含量CsC (mg g-1) 0.10 0.98 — 0.01 0.24 0.96 -0.61 -0.47 -0.07 0.25 0.42 0.30 0.70 -0.05 -0.49
特征值Eigenvalue 3.35 1.29 — 2.02 1.43 1.00 2.19 1.53 1.15 1.62 1.44 1.06 1.98 1.47 1.19
贡献率Contribution (%) 47.84 18.37 — 28.83 20.39 14.29 31.24 21.82 16.40 23.09 20.56 15.07 28.27 21.03 17.05
累计贡献率Accumulative contribution (%) 47.84 66.21 — 28.83 49.22 63.51 31.24 53.06 69.46 23.09 43.65 58.72 28.27 49.30 66.36

表5

茎-柄节点和果-柄节点拉断力均较大的优异种质"

材料名称
Sample name
材料类型
Sample type
植物学类型
Types of botany
茎-柄节点拉断力
BFSP (N)
果-柄节点拉断力
BFPP (N)
CE242 资源Germplasm 珍珠豆型Var. vulgaris 14.03±1.07 8.93±1.50
CE159 资源Germplasm 珍珠豆型Var. vulgaris 14.38±4.06 9.22±0.91
CE302 资源Germplasm 多粒型Var. fastigiata 15.32±1.64 10.45±1.25
CE248 资源Germplasm 珍珠豆型Var. vulgaris 15.41±2.06 7.02±1.78
HP17 品系Bred strain 多粒型Var. fastigiata 28.54±2.19 9.12±5.93
贺油11 Heyou 11 育成品种Cultivated variety 珍珠豆型Var. vulgaris 18.06±1.44 8.48±2.89
泉花551 Quanhua 551 育成品种Cultivated variety 珍珠豆型Var. vulgaris 15.03±1.29 9.93±0.22
粤油1701 Yueyou 1701 育成品种Cultivated variety 珍珠豆型Var. vulgaris 18.19±2.02 9.96±3.04
湛油75 Zhanyou 75 育成品种Cultivated variety 珍珠豆型Var. vulgaris 15.08±3.49 9.47±0.70
湛油82 Zhanyou 82 育成品种Cultivated variety 珍珠豆型Var. vulgaris 16.05±1.94 9.73±0.91
仲凯花4号 Zhongkaihua 4 育成品种Cultivated variety 珍珠豆型Var. vulgaris 15.08±2.64 14.50±4.01

图5

果柄强度差异极显著材料的木质素和纤维素含量比较分析 CE079、CE082、CE248、CE302的茎-柄节点拉断力、果-柄节点拉断力、果柄木质素含量、果柄纤维素含量分别见A~D。不同大写字母表示同一时期不同材料间差异极显著(P < 0.01), 不同小写字母表示同一时期不同材料间差异显著(P < 0.05)。DAF: 花后。缩写同表2。"

[1] 许静, 潘丽娟, 陈娜, 等. 不同花生荚果力学特性研究及优异品系筛选. 中国油料作物学报, 2021, 43: 803-815.
Xu J, Pan L J, Chen N, et al. Pods mechanical property of different peanuts and identification of elite varieties (lines). Chin J Oil Crop Sci, 2021, 43: 803-815 (in Chinese with English abstract).
[2] 宁世祥. 我国典型产区花生收获机械化及影响因素分析. 沈阳农业大学硕士学位论文, 辽宁沈阳, 2018.
Ning S X. Mechanization of Peanut Harvesting in Typical Producing Areas of China and Analysis of Its Influencing Factors. MS Thesis of Shenyang Agricultural University, Shenyang, Liaoning, China, 2018 (in Chinese with English abstract).
[3] 尚书旗, 王方艳, 刘曙光, 等. 花生收获机械的研究现状与发展趋势. 农业工程学报, 2004, 20(1): 20-25.
Shang S Q, Wang F Y, Liu S G, et al. Research situation and development trend on peanut harvesting machinery. Trans CSAE, 2004, 20(1): 20-25 (in Chinese with English abstract).
[4] 迟晓元, 许静, 潘丽娟, 等. 不同花生种质荚果力学特性研究. 花生学报, 2022, 51(4): 18-28.
Chi X Y, Xu J, Pan L J, et al. Study on pod mechanical properties of different peanut germplasms. J Peanut Sci, 2022, 51(4): 18-28 (in Chinese with English abstract).
[5] 王传堂, 王志伟, 王秀贞, 等. 不同花生基因型机械化收获相关特性的研究. 花生学报, 2019, 48(1): 52-57.
Wang C T, Wang Z W, Wang X Z, et al. Evaluation of different peanut genotypes for mechanized harvest properties. J Peanut Sci, 2019, 48(1): 52-57 (in Chinese with English abstract).
[6] 沈一, 刘永惠, 陈志德. 不同花生品种(系)果柄拉力强度测试和荚果主要性状调查. 江苏农业科学, 2012, 40(10): 82-83.
Shen Y, Liu Y H, Chen Z D. Tensile strength test of different peanut varieties (lines) and investigation of main pod characters. Jiangsu Agric Sci, 2012, 40(10): 82-83 (in Chinese).
[7] 郭丹丹. 花生荚果落荚性和荚果大小相关性状的全基因组关联分析. 华中农业大学硕士学位论文, 湖北武汉, 2022.
Guo D D. Genome-wide Association Analysis of the Traits Related to Pod Drop and Pod Size in Peanut. MS Thesis of Huazhong Agricultural University, Wuhan, Hubei, China, 2022 (in Chinese with English abstract).
[8] 隋荣娟, 潘滢月, 孙居彦. 不同成熟度花生果柄节点力学性能研究. 山东农业工程学院学报, 2019, 36(3): 25-28.
Sui R J, Pan Y Y, Sun J Y. Research on mechanical properties of peg nodes with different maturity of peanuts. J Shandong Agric Eng Univ, 2019, 36(3): 25-28 (in Chinese with English abstract).
[9] 刘龙, 刘道奇, 孙千涛, 等. 花生收获摘果力试验及分析. 农机化研究, 2022, 44(6): 139-144.
Liu L, Liu D Q, Sun Q T, et al. Experiment and analysis of the harvest and picking ability of peanut. J Agric Mech Res, 2022, 44(6): 139-144 (in Chinese with English abstract).
[10] 张甜, 孙雅文, 王铭伦, 等. 不同落果特性花生品种茎枝生长与结构的研究. 花生学报, 2018, 47(2): 59-62.
Zhang T, Sun Y W, Wang M L, et al. The research on structure growth of stems and branches of peanuts with different pod-dropping characteristics. J Peanut Sci, 2018, 47(2): 59-62 (in Chinese with English abstract).
[11] 张晓, 陈玲, 孙雅文, 等. 不同落果特性花生品种荚果性状及果壳强度的研究. 花生学报, 2019, 48(3): 60-64.
Zhang X, Chen L, Sun Y W, et al. The research on pod traits and shell strength of peanut varieties with different fruit drop characteristics. J Peanut Sci, 2019, 48(3): 60-64 (in Chinese with English abstract).
[12] 樊海潮, 顾万荣, 杨德光, 等. 化控剂对东北春玉米茎秆理化特性及抗倒伏的影响. 作物学报, 2018, 44: 909-919.
doi: 10.3724/SP.J.1006.2018.00909
Fan H C, Gu W R, Yang D G, et al. Effect of chemical regulators on physical and chemical properties and lodging resistance of spring maize stem in Northeast China. Acta Agron Sin, 2018, 44: 909-919 (in Chinese with English abstract).
doi: 10.3724/SP.J.1006.2018.00909
[13] 胡昊. 小麦茎秆特性与抗倒伏关系及其调控研究. 河南农业大学硕士学位论文, 河南郑州, 2013.
Hu H. Study on the Relationship between Wheat Stalk Characteristics and Lodging Resistance and Its Regulation. MS Thesis of Henan Agricultural University, Zhengzhou, Henan, China, 2013 (in Chinese with English abstract).
[14] 梁煜莹, 张加羽, 姜骁, 等. 花生品质与气候环境的关系研究. 植物遗传资源学报, 2024, 25: 227-244.
Liang Y Y, Zhang J Y, Jiang X, et al. Study on the relationship between peanut quality and climatic environments. J Plant Genet Resour, 2024, 25: 227-244 (in Chinese with English abstract).
doi: 10.13430/j.cnki.jpgr.20230728001
[15] 张玉松, 何柳, 张云云, 等. 不同生态区气象因子对花生产量相关性状的影响. 中国油料作物学报, 2024, 46: 676-686.
doi: 10.19802/j.issn.1007-9084.2024013
Zhang Y S, He L, Zhang Y Y, et al. Effects of meteorological factors in different ecoregions on yield-related traits of peanut production. Chin J Oil Crop Sci, 2024, 46: 676-686 (in Chinese with English abstract).
[16] 姜骁, 许静, 潘丽娟, 等. 花生产量相关性状与气象因子多环境相关性分析. 作物学报, 2023, 49: 3110-3121.
doi: 10.3724/SP.J.1006.2023.24218
Jiang X, Xu J, Pan L J, et al. Peanut yield-related traits and meteorological factors correlation analysis in multiple environments. Acta Agron Sin, 2023, 49: 3110-3121 (in Chinese with English abstract).
doi: 10.3724/SP.J.1006.2023.24218
[17] 徐日荣, 陈湘瑜, 陈昊, 等. 福建主栽花生品种果柄节点强度分析. 中国农机化学报, 2022, 43(5): 22-28.
Xu R R, Chen X Y, Chen H, et al. Analysis of peg strength of main peanut varieties in Fujian province. J Chin Agric Mech, 2022, 43(5): 22-28 (in Chinese with English abstract).
[18] 王鹏, 樊秀彩, 张颖, 等. 600份葡萄种质资源果柄耐拉力鉴定评价. 植物遗传资源学报, 2019, 20: 1197-1212.
doi: 10.13430/j.cnki.jpgr.20181213002
Wang P, Fan X C, Zhang Y, et al. Identification and evaluation of pulling force of fruit stalk for 600 grape germplasm resources. J Plant Genet Resour, 2019, 20: 1197-1212 (in Chinese with English abstract).
[19] 罗茂春, 田翠婷, 李晓娟, 等. 水稻茎秆形态结构特征和化学成分与抗倒伏关系综述. 西北植物学报, 2007, 27: 2346-2353.
Luo M C, Tian C T, Li X J, et al. Relationship between morpho-anatomical traits together with chemical components and lodging resistance of stem in rice (Oryza sativa L.). Acta Bot Boreali-Occident Sin, 2007, 27: 2346-2353 (in Chinese with English abstract).
[20] 夏星, 汤寓涵, 陶俊, 等. 观赏植物茎秆强度形成及其调控. 植物生理学报, 2018, 54: 347-354.
Xia X, Tang Y H, Tao J, et al. Formation and regulation of ornamental plant stem strength. Plant Physiol J, 2018, 54: 347-354 (in Chinese with English abstract).
[21] 张水金, 郑轶, 朱永生, 等. 水稻脆性突变体研究进展. 福建农业学报, 2011, 26: 895-898.
Zhang S J, Zheng Y, Zhu Y S, et al. Advance in research on brittleness mutant of rice. Fujian J Agric Sci, 2011, 26: 895-898 (in Chinese with English abstract).
[22] 屈丝雨, 任甜, 樊丁宇, 等. 灰枣和冬枣果实质地差异的解剖学观察及相关酶活性研究. 果树学报, 2024, 41: 1811-1820.
Qu S Y, Ren T, Fan D Y, et al. Anatomical observation on the differences in the fruit texture between Huizao and Dongzao jujube and related enzyme activities. J Fruit Sci, 2024, 41: 1811-1820.
[23] Maluin F N, Hussein M Z, Idris A S. An overview of the oil palm industry: challenges and some emerging opportunities for nanotechnology development. Agronomy, 2020, 10: 356.
doi: 10.3390/agronomy10030356
[24] Guan L Y, Huang Q Z, Wang X J, et al. Rapid prediction of mechanical properties based on the chemical components of windmill palm fiber. Materials, 2022, 15: 4989.
doi: 10.3390/ma15144989
[25] 卢明, 洪珊, 剧虹伶, 等. 施钙对‘台农17号’菠萝裂柄的生理影响及效果. 植物生理学报, 2018, 54: 565-573.
Lu M, Hong S, Ju H L, et al. Influence of calcium on peduncle cracking of pineapple (Ananas comosus cv. ‘Tainong 17’) and its physiological mechanism. Plant Physiol J, 2018, 54: 565-573 (in Chinese).
[26] 陈晓光, 史春余, 尹燕枰, 等. 小麦茎秆木质素代谢及其与抗倒性的关系. 作物学报, 2011, 37: 1616-1622.
doi: 10.3724/SP.J.1006.2011.01616
Chen X G, Shi C Y, Yin Y P, et al. Relationship between lignin metabolism and lodging resistance in wheat. Acta Agron Sin, 2011, 37: 1616-1622 (in Chinese with English abstract).
doi: 10.3724/SP.J.1006.2011.01616
[1] 郑玉珍, 齐飞艳, 孙子淇, 刘华, 秦利, 石磊, 王娟, 汪蒙蒙, 韩锁义, 徐静, 苗利娟, 黄冰艳, 董文召, 郑峥, 张新友. 花生籽仁总超长链脂肪酸和7种脂肪酸组分的QTL定位[J]. 作物学报, 2026, 52(6): 1646-1657.
[2] 陆一楚, 李振影, 买春海, 赵晓蕊, 王利祥. 夜间复合体关键基因AhLUX1正向调控花生结瘤的功能研究[J]. 作物学报, 2026, 52(6): 1658-1668.
[3] 谷春苗, 王润风, 黄璐, 刘浩, 鲁清, 李海芬, 李少雄, 何双呈, 洪彦彬, 陈小平, 谭斌, 余倩霞. 花生WOX基因家族的全基因组分析及不定芽再生候选基因的鉴定[J]. 作物学报, 2026, 52(5): 1326-1340.
[4] 于天一, 王春晓, 肖丽, 钟召迪, 王宣仓, 赵勇, 路亚, 吴月, 吴正锋. 不同结瘤特性花生品种氮素累积、产量及品质特性对氮肥用量的响应[J]. 作物学报, 2026, 52(3): 881-894.
[5] 张胜忠, 李国卫, 戈立江, 王菲菲, 胡晓辉, 苗华荣, 李燕, 钟文, 陈静. 花生机械脱壳损伤相关农艺指标筛选与QTL定位[J]. 作物学报, 2026, 52(2): 644-652.
[6] 王菲菲, 张胜忠, 杨贵华, 苗华荣, 胡晓辉, 张则林, 刘莎莎, 乔利仙, 单世华, 陈静. 331份花生种质苗期耐盐性综合评价和强耐盐种质鉴选[J]. 作物学报, 2026, 52(1): 279-294.
[7] 金欣欣, 宋亚辉, 苏俏, 杨永庆, 王瑾. 高产高油高油酸花生品种的生长发育及干物质生产特征[J]. 作物学报, 2026, 52(1): 191-201.
[8] 迟晓元, 刘庆, 张君, 赵旭红, 李美, 于天一, 潘丽娟, 许静, 姜骁, 殷祥贞, 马俊卿, 陈娜. 不同花生品种(系)耐盐碱性田间鉴定及各性状指标相关性研究[J]. 作物学报, 2026, 52(1): 85-98.
[9] 万书波, 张佳蕾, 高华鑫, 王才斌. 中国花生高产栽培研究进展与展望[J]. 作物学报, 2025, 51(7): 1703-1711.
[10] 郭腾达, 崔梦杰, 陈琳杰, 韩锁义, 郭敬坤, 吴晨迪, 付留洋, 黄冰艳, 董文召, 张新友. 花生磷脂酰肌醇转运蛋白基因AhSFH的克隆及其响应黄曲霉菌侵染的表达特征分析[J]. 作物学报, 2025, 51(6): 1489-1500.
[11] 李文佳, 廖泳俊, 黄璐, 鲁清, 李少雄, 陈小平, 金晶炜, 王润风. 花生开花时间的全基因组关联分析及候选基因筛选[J]. 作物学报, 2025, 51(5): 1400-1408.
[12] 林伟津, 郭泽佳, 刘浩, 李海芬, 王润风, 黄璐, 余倩霞, 陈小平, 洪彦彬, 李少雄, 鲁清. 花生荚果产量相关性状QTL定位与候选基因分析[J]. 作物学报, 2025, 51(4): 969-981.
[13] 迟晓元, 毕竞男, 赵健鑫, 陈娜, 潘丽娟, 姜骁, 殷祥贞, 赵旭红, 马俊卿, 许静. 花生荚果力学特性评鉴及早熟种质筛选[J]. 作物学报, 2025, 51(4): 943-957.
[14] 晋高锐, 吴小丽, 邓丽, 陈玉宁, 喻博伦, 郭建斌, 丁膺宾, 刘念, 罗怀勇, 陈伟刚, 黄莉, 周小静, 淮东欣, 谭家壮, 姜慧芳, 任丽, 雷永, 廖伯寿. 兼抗黄曲霉侵染和产毒高油酸花生新种质的创制与评价[J]. 作物学报, 2025, 51(3): 687-895.
[15] 金欣欣, 宋亚辉, 苏俏, 杨永庆, 李玉荣, 王瑾. 冀花系列高油酸花生抗旱性鉴定与综合评价[J]. 作物学报, 2025, 51(3): 797-811.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!